Skip to product information
Dear Valued Customer
Thanks for your purchase
If you Satisfied with your order
We would aprreciated if you left us a Review
your feedback is very important to us
===============================
Wholesales price
Sold By
Globalsourcewd
California - USA
==============
You Are Buying
Brand: ISUMO
Designed to meet or exceed OE specifications
|
Power Steering Pressure Line Hose Assembly(49720-2Y000) ====================================== |
Part#
49720-2Y900
==========
Cross-Reference
92037
979-502
979502
365820
497202Y900
497202Y90A
49720-5Y700
49720-2Y90A
49720-5Y700
PSPH3003NI
==========
Specifications:
| Category | Power Steering Pressure Hose |
| Length : | 27.75 Inch |
| End 1 Diameter : | 16 mm |
| End 1 Type | Banjo |
| End 2 Diameter : | 14 mm |
| End 2 Type | Female Inverted Flare |
| Includes Switch Port | No |
===================================
Fits:
| NISSAN | MAXIMA | 1999 - 2003 |
==========================================
Replace all power steering hoses at the same time, to prevent system contamination
Completely flush the system with an OE approved Power Steering Fluid prior to installation (the correct type of fluid is noted on the reservoir cap or in your owner's manual). Flushing the system is critical to prevent system contamination and failure
Install the replacement hose in reverse order of how it was removed, making sure to install any included o-rings. Lubricate the o-rings with Silicone Grease and carefully install them, to prevent damage. Make sure the hose is not touching or rubbing against any components that vibrate or give off heat
Consider installing a Power Steering Filter on the Power Steering Return Hose to prevent system contamination and extend the life of the power steering components
Completely flush the system with an OE approved Power Steering Fluid prior to installation (the correct type of fluid is noted on the reservoir cap or in your owner's manual). Flushing the system is critical to prevent system contamination and failure
Install the replacement hose in reverse order of how it was removed, making sure to install any included o-rings. Lubricate the o-rings with Silicone Grease and carefully install them, to prevent damage. Make sure the hose is not touching or rubbing against any components that vibrate or give off heat
Consider installing a Power Steering Filter on the Power Steering Return Hose to prevent system contamination and extend the life of the power steering components
===================================================