Skip to product information
Dear Valued Customer
Thanks for your business
If you Satisfied with your order
We would aprreciated if you left us a Review
your feedback is very important to us
================================
You Are Buying
Brand: ISUMO 87138-41020 RU294 2040004 204-0004 JA1341
Aftermarket Premium High Quality
Aftermarket Premium High Quality
Blower Motor Resistor
Quantity: 1
==========
Part#
BMR541
=========
Cross-Reference
19184664
8713841020
8713841020
BMR541
RU770
4P1606
JA1728
1581135
15-81135
984254
984-254
20479
=========
Specifications:
| Category | Blower Motor Resistor |
| Attachment Method | Bolt On |
| Coil Type | Electronic |
| Connector Gender | Female |
| Connector Quantity | 1 |
| Connector Shape | Rectangular, Square |
| Hardware Included | No |
| Harness Length - cm | No wire |
| Harness Length - Inches | No wire |
| Mounting Bracket(s) Included | Yes |
| Number Of Connector Cavities | 4 |
| Number of Speeds | 3-5 Speed |
| Terminal Gender | Male |
| Terminal Quantity | 4 |
| Terminal Type | Blade |
| Wiring Harness Included | No |
=========================
Fits:
Fits:
|
==================================
Blower Motor Resistor
Location:
The blower motor resistor will typically be in the blower fan case. Because of
the heat created by the resistor, the air movement of the fan is needed to keep the resistor
temperature in control. Excessive heat will damage the blower resistor. Depending on the
vehicle application, the resistor may be accessed from inside the engine compartment in
the passenger rear corner or from inside the vehicle in the area below the glove
compartment storage area.
What It Does:
The blower motor resistor is in the fan motor control circuit to lower the
voltage level available to the fan motor thus controlling fan speed. A typical fan motor
control circuit will have the fan switch applying voltage to the appropriate circuit of the
blower motor resistor; the resistor controls the voltage level in the circuit. The fan motor
high speed circuit is usually a direct power circuit from the fan switch.
Failure Symptoms: Depending on the failure mode, the blower fan may lose one speed
when the resistor fails or it may lose all speeds except high. Excessive heat will cause the
thermal fuse within the resistor to open causing a loss of all lower fan speeds.
Diagnostic Hints: Blockage of the cowl area near the wiper arms with leaves and debris
will cause a loss of air flow around the resistor and lead to a possible failure of the blower
resistor. Also, a blower motor may operate as expected but electrically it may be drawing
too much current. Always check circuit amperage of the blower motor circuit when
replacing a blower motor resistor. Consult a repair resource for proper circuit amperage
Location:
The blower motor resistor will typically be in the blower fan case. Because of
the heat created by the resistor, the air movement of the fan is needed to keep the resistor
temperature in control. Excessive heat will damage the blower resistor. Depending on the
vehicle application, the resistor may be accessed from inside the engine compartment in
the passenger rear corner or from inside the vehicle in the area below the glove
compartment storage area.
What It Does:
The blower motor resistor is in the fan motor control circuit to lower the
voltage level available to the fan motor thus controlling fan speed. A typical fan motor
control circuit will have the fan switch applying voltage to the appropriate circuit of the
blower motor resistor; the resistor controls the voltage level in the circuit. The fan motor
high speed circuit is usually a direct power circuit from the fan switch.
Failure Symptoms: Depending on the failure mode, the blower fan may lose one speed
when the resistor fails or it may lose all speeds except high. Excessive heat will cause the
thermal fuse within the resistor to open causing a loss of all lower fan speeds.
Diagnostic Hints: Blockage of the cowl area near the wiper arms with leaves and debris
will cause a loss of air flow around the resistor and lead to a possible failure of the blower
resistor. Also, a blower motor may operate as expected but electrically it may be drawing
too much current. Always check circuit amperage of the blower motor circuit when
replacing a blower motor resistor. Consult a repair resource for proper circuit amperage
========================================================================
| WARRANTY POLICY: |
| We cover return within 30 days from date of purchase. |
| After that buyer responsible to return and pay for replacement shipping cost and to show proof of purchase date. |
| We don't do refund, we exchange. |
| Please contact us to check shipping cost for each item under warranty. |
| The warranty only covers failures due to defects in material and manufacturing and doesn?t cover normal wear and tear or cosmetic damage. |
| Item Should be return with original packaging and in Good Condition by Taking Photo with the date of return |