Skip to product information
Dear Valued Customer
Thanks for your business
If you Satisfied with your order
We would aprreciated if you left us a Review
your feedback is very important to us
================================
You Are Buying
Brand: ISUMO BL3Z-19E624A + BL3Z9E624E
Aftermarket Premium High Quality
Blower Motor Control Module / Resistor
with
Electrical Connector
( Pigtail Wire Harness)
Quantity: 1 Kit
============
Part#
BMR522 (color of item may vary)
========
Cross-Reference
BMR522/1
BMR522/2
BL3Z19E624A
5F9Z19E624AA
7C3Z19E624A
7C3Z19E624B
7C3Z19E624C
9L3Z19E624B
BL3Z19E624A
973-506
973506
30J1050
RU573
JA1713
JA1925
=========
Description:
| Connector Gender:Female |
| Terminal Gender:Male (1) |
| Terminal Type:Blade |
| Terminal Quantity:4 |
| Voltage:12 |
=========
Fits:
Fits:
| FORD | ESCAPE | 2008-2012 |
| FORD | EXPEDITION | 2007-2016 |
| FORD | EXPLORER | 2010-2016 |
| FORD | F-150 | 2009-2014 |
| FORD | F-250 SUPER DUTY | 2008-2010 |
| FORD | F-350 SUPER DUTY | 2008-2010 |
| FORD | F-450 SUPER DUTY | 2008-2010 |
| FORD | F-550 SUPER DUTY | 2008-2010 |
| FORD | FIVE HUNDRED | 2005-2007 |
| FORD | FLEX | 2009-2016 |
| FORD | FREESTYLE | 2005-2007 |
| FORD | MUSTANG | 2010-2014 |
| FORD | TAURUS | 2008-2016 |
| FORD | TAURUS X | 2008-2009 |
| LINCOLN | MKS | 2009-2016 |
| LINCOLN | MKT | 2010-2016 |
| LINCOLN | NAVIGATOR | 2007-2016 |
| MERCURY | MARINER | 2008-2011 |
| MERCURY | MONTEGO | 2005-2007 |
| MERCURY | SABLE | 2008-2009 |
=================================
Blower Motor Resistor
Location:
The blower motor resistor will typically be in the blower fan case. Because of
the heat created by the resistor, the air movement of the fan is needed to keep the resistor
temperature in control. Excessive heat will damage the blower resistor. Depending on the
vehicle application, the resistor may be accessed from inside the engine compartment in
the passenger rear corner or from inside the vehicle in the area below the glove
compartment storage area.
What It Does:
The blower motor resistor is in the fan motor control circuit to lower the
voltage level available to the fan motor thus controlling fan speed. A typical fan motor
control circuit will have the fan switch applying voltage to the appropriate circuit of the
blower motor resistor; the resistor controls the voltage level in the circuit. The fan motor
high speed circuit is usually a direct power circuit from the fan switch.
Failure Symptoms: Depending on the failure mode, the blower fan may lose one speed
when the resistor fails or it may lose all speeds except high. Excessive heat will cause the
thermal fuse within the resistor to open causing a loss of all lower fan speeds.
Diagnostic Hints: Blockage of the cowl area near the wiper arms with leaves and debris
will cause a loss of air flow around the resistor and lead to a possible failure of the blower
resistor. Also, a blower motor may operate as expected but electrically it may be drawing
too much current. Always check circuit amperage of the blower motor circuit when
replacing a blower motor resistor. Consult a repair resource for proper circuit amperage
Location:
The blower motor resistor will typically be in the blower fan case. Because of
the heat created by the resistor, the air movement of the fan is needed to keep the resistor
temperature in control. Excessive heat will damage the blower resistor. Depending on the
vehicle application, the resistor may be accessed from inside the engine compartment in
the passenger rear corner or from inside the vehicle in the area below the glove
compartment storage area.
What It Does:
The blower motor resistor is in the fan motor control circuit to lower the
voltage level available to the fan motor thus controlling fan speed. A typical fan motor
control circuit will have the fan switch applying voltage to the appropriate circuit of the
blower motor resistor; the resistor controls the voltage level in the circuit. The fan motor
high speed circuit is usually a direct power circuit from the fan switch.
Failure Symptoms: Depending on the failure mode, the blower fan may lose one speed
when the resistor fails or it may lose all speeds except high. Excessive heat will cause the
thermal fuse within the resistor to open causing a loss of all lower fan speeds.
Diagnostic Hints: Blockage of the cowl area near the wiper arms with leaves and debris
will cause a loss of air flow around the resistor and lead to a possible failure of the blower
resistor. Also, a blower motor may operate as expected but electrically it may be drawing
too much current. Always check circuit amperage of the blower motor circuit when
replacing a blower motor resistor. Consult a repair resource for proper circuit amperage
========================================================================
Resistencia del motor del ventilador
Localización:
La resistencia del motor del ventilador normalmente estará en la carcasa del ventilador. Porque
el calor creado por la resistencia, el movimiento de aire del ventilador es necesario para mantener la resistencia
temperatura bajo control. El calor excesivo dañará la resistencia del ventilador. Dependiendo de
aplicación del vehículo, se puede acceder a la resistencia desde el interior del compartimiento del motor en
la esquina trasera del pasajero o desde el interior del vehículo en el área debajo del guante
área de almacenamiento del compartimiento.
Que hace:
La resistencia del motor del ventilador está en el circuito de control del motor del ventilador para bajar el
nivel de voltaje disponible para el motor del ventilador controlando así la velocidad del ventilador. Un motor de ventilador típico
El circuito de control tendrá el interruptor del ventilador aplicando voltaje al circuito apropiado del
resistencia del motor del ventilador; la resistencia controla el nivel de voltaje en el circuito. El motor del ventilador
El circuito de alta velocidad suele ser un circuito de alimentación directo del interruptor del ventilador.
Síntomas de falla: Dependiendo del modo de falla, el ventilador puede perder una velocidad
cuando la resistencia falla o puede perder todas las velocidades excepto la alta. El calor excesivo provocará
El fusible térmico dentro de la resistencia se abre causando una pérdida de todas las velocidades más bajas del ventilador.
Sugerencias de diagnóstico: Obstrucción del área de la cubierta cerca de los brazos del limpiaparabrisas con hojas y escombros.
causará una pérdida de flujo de aire alrededor de la resistencia y provocará una posible falla del soplador
resistor. Además, un motor de ventilador puede funcionar como se espera, pero eléctricamente puede estar atrayendo
demasiada corriente. Compruebe siempre el amperaje del circuito del motor del ventilador cuando
Reemplazo de una resistencia del motor del ventilador.
Consulte a un recurso de reparación para conocer el amperaje adecuado del circuito.
================================================ ======================
Made In USA Canada Mexico Germany Japan Nippon Denso Korea Taiwan OEM Original Genuine
| WARRANTY POLICY: |
| We cover return within 30 days from date of purchase. |
| After that buyer responsible to return and pay for replacement shipping cost and to show proof of purchase date. |
| We don't do refund, we exchange. |
| Please contact us to check shipping cost for each item under warranty. |
| The warranty only covers failures due to defects in material and manufacturing and doesn?t cover normal wear and tear or cosmetic damage. |
| Item Should be return with original packaging and in Good Condition by Taking Photo with the date of return |