Skip to product information
Dear Valued Customer
Thanks for your purchase
If you Satisfied with your order
We would aprreciated if you left us a Review
your feedback is very important to us
===============================
Wholesales Price
Sold By
Globalsourcewd
California - USA
==============
You Are BuyingBrand: ISUMO
Aftermarket Premium High Quality
Ignition Coil
Quantity: 1 Piece Quantity Needed: 1 per Cylinder
==============================
Part#
30520-P8E-A01
=============
Cross-Reference
UF242
12582000
12655956
1AMIC00021
30520P8EA00
30520P8EA01
30520P8ES01
30520P8FA01
30520PGKA01
30520PVFA01
30520PVJA01
30520RCAA01
30520RCAA02
30520RDJA01
5C1016
5C1451
5C1633
5C1634
C1221
C1460
C1576
C1577
====
Specifications:
=============================
Fits
================================
The Ignition Coil is located near the distributor in older applications, on top of the ignition control module in distributor-less ignition systems or as a coil-on-plug or coil-near-plug in
For What: The Ignition Coil supplies the needed voltage required to fire the spark plug and complete the ignition cycle. The secondary output voltage from the ignition coil is generated when the voltage in the ignition coil primary circuit is momentarily shorted to ground and then open circuited. The magnetic field within the coil collapses when the circuit opens inducing the voltage into the ignition coils secondary winding. The primary circuit is controlled by the opening of the points or electronically by the Ignition Control Module or PCM/ECM in newer applications. newer applications. Failure Symptoms: Malfunction Indicator Light (MIL) illumination, failed emission test, misfire condition, hard starting, no start, engine hesitation.
====================================================================================
Features & Benefits:
100% pure copper windings in primary and secondary bobbins improve durability and provide higher resistance to internal shorts and dielectric breakdown
Electronic ignition module profile and feedback signal ensures proper OE fit, form, and function
Thermoplastic housing withstands heat stress for enhanced durability
Internal core made from grain-oriented electrical steel limits loss factor within magnetic circuit to reduce heat that may reduce coil endurance
Samarium-Cobalt magnet produces max high voltage output at all speeds
Stainless steel spring resists corrosion
Tin-plated brass terminals improve electrical contact and protect against corrosion
High-dielectric epoxy injected into case and pulled into vacuum to eliminate air pockets and prevent moisture intrusion or thermal breakdown
Silicone rubber boot withstands extreme heat to ensure superior insulation
============================================================= |