Skip to product information
Dear Valued Customer
Thanks for your business
If you Satisfied with your order
We would aprreciated if you left us a Review
your feedback is very important to us
================================
Wholesales Price
Sold By:
Globalsourcewd
Globalsourcewd
California - USA
=============
You Are Buying Brand ISUMO
Aftermarket High premium Quality
Exhaust Gas Recirculation Valve (EGR)
Quantity: 1 Piece
==============
Part#
EGR2250-025
===========
Cross-Reference
EGR1027
EGV514
4153
4185
23206
EGR1027
4F1053
12578042
17094153
17094185
17113283
2145007
======
Specifications:
| Connector Gender | Female |
| Connector Quantity | 1 |
| Connector Shape | Oblong |
| EGR Valve Type | Linear |
| Gasket or Seal Included | Yes |
| Mounting Hole Quantity | 2 |
| Terminal Gender | Male |
| Terminal Quantity | 5 |
=====================
Fits:
| BUICK | LESABRE | 1994-1995 |
| BUICK | PARK AVENUE | 1994-1995 |
| BUICK | REGAL | 1994-1995 |
| BUICK | RIVIERA | 1995 |
| CHEVROLET | LUMINA APV | 1994-1995 |
| OLDSMOBILE | 88 | 1994-1995 |
| OLDSMOBILE | 98 | 1994-1995 |
| OLDSMOBILE | LSS | 1996-1999 |
| OLDSMOBILE | SILHOUETTE | 1994-1995 |
| PONTIAC | BONNEVILLE | 1994-1995 |
| PONTIAC | TRANS SPORT | 1994-1995 |
============================================
What It Does:
The EGR Valve’s purpose is to control exhaust emission levels emitted from the combustion chamber. This is achieved by re-circulating exhaust gases obtained after the combustion chamber into the intake manifold. This inert gas takes the place of oxygen that would normally enter the combustion chamber thus cooling the temperature of the combustion event. The EGR Valve is the “gate” that allows this flow. Location: The EGR Valve is located on the engine block or intake manifold Failure Symptoms: Malfunction Indicator Light (MIL) illumination, failed emission test, rough engine idle, no idle condition, engine hesitation, surging
=========================================================
Repair tips:
Allow engine to cool before attempting replacement to avoid personal injury and fastener damage
If trouble code indicates insufficient flow, clean intake manifold passages
==================================================
If trouble code indicates insufficient flow, clean intake manifold passages
==================================================
Válvula de recirculación de gases de escape (EGR)
Que hace:
El propósito de la válvula EGR es controlar los niveles de emisión de escape emitidos desde la cámara de combustión. Esto se logra al recircular los gases de escape obtenidos después de la cámara de combustión en el colector de admisión. Este gas inerte toma el lugar del oxígeno que normalmente entraría en la cámara de combustión enfriando así la temperatura del evento de combustión. La válvula EGR es la "compuerta" que permite este flujo. Ubicación: la válvula EGR se encuentra en el bloque del motor o en el múltiple de admisión Síntomas de falla: iluminación de la luz indicadora de mal funcionamiento (MIL), prueba de emisión fallida, ralentí del motor en vacío, sin condición de ralentí, vacilación del motor, sobretensión
================================================== =======
Consejos de reparación:
Deje que el motor se enfríe antes de intentar reemplazarlo para evitar lesiones personales y daños a los sujetadores
Si el código de problema indica flujo insuficiente, limpie los conductos del múltiple de admisión
===============================================================================
排気ガス再循環バルブ（EGR）
内容：
EGRバルブの目的は、燃焼室から放出される排気ガスのレベルを制御することです。 これは、燃焼室の後に得られた排気ガスを吸気マニフォールドに再循環させることで実現されます。 この不活性ガスは、通常燃焼室に入る酸素の代わりとなり、燃焼イベントの温度を冷却します。 EGRバルブは、このフローを可能にする「ゲート」です。 位置：EGRバルブはエンジンブロックまたは吸気マニフォールドにあります故障症状：故障インジケータライト（MIL）照明、エミッションテストの失敗、エンジンのラフアイドル、アイドル状態なし、エンジンヘジテーション、サージング
================================================== =======
修理のヒント：
怪我やファスナーの損傷を避けるため、交換を試みる前にエンジンを冷ましてください
トラブルコードが不十分な流量を示している場合、インテークマニホールドの通路を清掃します
==================================================
Haiki gasu sai junkan barubu (EGR) naiyō: EGR barubu no mokuteki wa, nenshō-shitsu kara hōshutsu sa reru haiki gasu no reberu o seigyo suru kotodesu. Kore wa, nenshō-shitsu no nochi ni e rareta haiki gasu o kyūki manifōrudo ni sai junkan sa seru koto de jitsugen sa remasu. Kono fukasseigasu wa, tsūjō nenshō-shitsu ni hairu sanso no kawari to nari, nenshō ibento no ondo o reikyaku shimasu. EGR barubu wa, kono furō o kanō ni suru `gēto'desu. Ichi: EGR barubu wa enjin burokku matawa kyūki manifōrudo ni arimasu koshō shōjō: Koshō injikētaraito (miru) shōmei, emisshontesuto no shippai, enjin no rafuaidoru, aidoru jōtai nashi, enjinhejitēshon, sājingu
--------------------------
shūri no hinto: Kega ya fasunā no sonshō o yokeru tame, kōkan o kokoromiru mae ni enjin o samashite kudasai toraburukōdo ga fujūbun'na ryūryō o shimeshite iru baai, intēkumanihōrudo no tsūro o seisō shimasu = = = = = = = = = = = = = = = = = = = = = = = = = =======================================================
Made In USA Mexico United States Japan Nippon Denso Germany
| WARRANTY POLICY: |
| We cover return within 30 days from date of purchase. |
| After that buyer responsible to return and pay for replacement shipping cost and to show proof of purchase date. |
| We don't do refund, we exchange. |
| Please contact us to check shipping cost for each item under warranty. |
| The warranty only covers failures due to defects in material and manufacturing and doesn?t cover normal wear and tear or cosmetic damage. |
| Item Should be return with original packaging and in Good Condition by Taking Photo with the date of return |