Skip to product information
Dear Valued Customer
Thanks for your business
If you Satisfied with your order
We would aprreciated if you left us a Review
your feedback is very important to us
================================
Wholesales price
Sold By:
Globalsourcewd
California-USA
=============
You Are Buying
Aftermarket Premium High Quality
Brand: ISUMO™
Tensioner Pulley
Quantity: 1 Piece
==============
Part#
PT446
======
Cross-Reference
88916640
=========
Specifications:
| Number of Pulleys | 1 |
| Pulley 1 Bearing Inner Diameter (IN) | 0.67 |
| Pulley 1 Bearing Inner Diameter (MM) | 17 |
| Pulley 1 Configuration | Non-flanged |
| Pulley 1 Contact Surface | Smooth |
| Pulley 1 Material | Thermoplastic |
| Pulley 1 Outer Diameter (IN) | 2.756 |
| Pulley 1 Outer Diameter (MM) | 70 |
| Pulley 1 Width (IN) | 1.028 |
| Pulley 1 Width (mm) | 26.1 |
==================================
Fits:
| SCION | TC | 2005-2010 |
| SCION | XB | 2008 |
| TOYOTA | CAMRY | 2002-2006 |
| TOYOTA | HIGHLANDER | 2001-2007 |
| TOYOTA | RAV4 | 2001-2008 |
| TOYOTA | SOLARA | 2002-2007 |
===============================
Drive Align Premium OE Pulley; Smooth
Made of steel or premium thermoplastic for longer wear life and higher load capacity
Available for both backside and groove-side applications
Built with precise dimensional tolerance for smooth operation
Built with corrosion-resistant coating for better durability
Designed to operate under severe conditions which provide greater reliability
Made with premium service-free bearings and seals that can operate at higher temperatures providing OE performance
NOTE: Always check for interference before re-installing the washer. In some cases, the washer may not fit in the new pulley.
If this is the case, it is not necessary to replace the washer. The pulley will “center up” automatically as the bolt is tightened.
The bearing in the idler is already greased and sealed. Tighten the pulley bolt and reinstall the tensioner.
No adjustment is required for belt tension.
===========================
Polea DriveAlign Premium OE; Suave
Hecho de acero o termoplástico premium para una mayor vida útil y una mayor capacidad de carga
Disponible para aplicaciones tanto en la parte trasera como en la ranura
Construido con tolerancia dimensional precisa para un funcionamiento suave
Construido con revestimiento resistente a la corrosión para una mejor durabilidad.
Diseñado para operar en condiciones severas que brindan mayor confiabilidad
Hecho con rodamientos y sellos premium sin servicio que pueden funcionar a temperaturas más altas proporcionando un rendimiento de equipo original
NOTA: Siempre verifique la interferencia antes de volver a instalar la lavadora. En algunos casos, la arandela puede no encajar en la nueva polea.
Si este es el caso, no es necesario reemplazar la lavadora. La polea se "centrará" automáticamente cuando se apriete el perno.
El rodamiento en la rueda loca ya está engrasado y sellado. Apriete el perno de la polea y vuelva a instalar el tensor.
No se requiere ajuste para la tensión de la correa.
Available for both backside and groove-side applications
Built with precise dimensional tolerance for smooth operation
Built with corrosion-resistant coating for better durability
Designed to operate under severe conditions which provide greater reliability
Made with premium service-free bearings and seals that can operate at higher temperatures providing OE performance
NOTE: Always check for interference before re-installing the washer. In some cases, the washer may not fit in the new pulley.
If this is the case, it is not necessary to replace the washer. The pulley will “center up” automatically as the bolt is tightened.
The bearing in the idler is already greased and sealed. Tighten the pulley bolt and reinstall the tensioner.
No adjustment is required for belt tension.
===========================
Polea DriveAlign Premium OE; Suave
Hecho de acero o termoplástico premium para una mayor vida útil y una mayor capacidad de carga
Disponible para aplicaciones tanto en la parte trasera como en la ranura
Construido con tolerancia dimensional precisa para un funcionamiento suave
Construido con revestimiento resistente a la corrosión para una mejor durabilidad.
Diseñado para operar en condiciones severas que brindan mayor confiabilidad
Hecho con rodamientos y sellos premium sin servicio que pueden funcionar a temperaturas más altas proporcionando un rendimiento de equipo original
NOTA: Siempre verifique la interferencia antes de volver a instalar la lavadora. En algunos casos, la arandela puede no encajar en la nueva polea.
Si este es el caso, no es necesario reemplazar la lavadora. La polea se "centrará" automáticamente cuando se apriete el perno.
El rodamiento en la rueda loca ya está engrasado y sellado. Apriete el perno de la polea y vuelva a instalar el tensor.
No se requiere ajuste para la tensión de la correa.
================================
Made In Japan Nippon Denso USA United States Korea Germany
| WARRANTY POLICY: |
| We cover return within 30 days from date of purchase. |
| After that buyer responsible to return and pay for replacement shipping cost and to show proof of purchase date. |
| We don't do refund, we exchange. |
| Please contact us to check shipping cost for each item under warranty. |
| The warranty only covers failures due to defects in material and manufacturing and doesn?t cover normal wear and tear or cosmetic damage. |
| Item Should be return with Original packaging and in Good Condition |