Skip to product information
Dear Valued Customer
Thanks for your business
If you Satisfied with your order
We would aprreciated if you left us a Review
your feedback is very important to us
================================
Wholesales price
Sold By:
Globalsourcewd
Globalsourcewd
California - USA
=============
You Are BuyingBrand: ISUMO
Aftermarket Premium High Quality
Aftermarket Premium High Quality
Blower Motor Resistor - Front
Quantity: 1 Piece
===============
Part#
Part#
BMR538
========
Cross-Reference
64119146765
RU729
64116927090
64119146765
64119222072
509783
4P1660
973113
973-113
20431
V20790017
JA1782
=========
Description:
| Bolt Hole Quantity | 2 |
| Connector Gender | Female |
| Connector Quantity | 2 |
| Connector Shape | Rectangular |
| Terminal Gender | Male |
| Terminal Quantity | 6 |
| Terminal Type | Blade |
| Wiring Harness Included | No |
=======
Fits:
Fits:
| BMW | 1 SERIES M | 2011 |
| BMW | 128I | 2008-2013 |
| BMW | 135I | 2008-2013 |
| BMW | 135IS | 2013 |
| BMW | 323I | 2009-2010 |
| BMW | 325I | 2006 |
| BMW | 325XI | 2006 |
| BMW | 328I | 2007-2013 |
| BMW | 328XI | 2007-2008 |
| BMW | 330I | 2006 |
| BMW | 330XI | 2006 |
| BMW | 335D | 2009-2011 |
| BMW | 335I | 2007-2013 |
| BMW | 335IS | 2011-2013 |
| BMW | 335XI | 2007-2008 |
| BMW | M3 | 2008-2013 |
| BMW | M5 | 1988 |
| BMW | X1 | 2014-2015 |
| BMW | X3 | 2011-2015 |
| BMW | X4 | 2015 |
| BMW | X5 | 2007-2013 |
| BMW | X6 | 2008-2014 |
| BMW | Z4 | 2009-2015 |
====================================
Blower Motor Resistor
Location:
The blower motor resistor will typically be in the blower fan case. Because of
the heat created by the resistor, the air movement of the fan is needed to keep the resistor
temperature in control. Excessive heat will damage the blower resistor. Depending on the
vehicle application, the resistor may be accessed from inside the engine compartment in
the passenger rear corner or from inside the vehicle in the area below the glove
compartment storage area.
What It Does:
The blower motor resistor is in the fan motor control circuit to lower the
voltage level available to the fan motor thus controlling fan speed. A typical fan motor
control circuit will have the fan switch applying voltage to the appropriate circuit of the
blower motor resistor; the resistor controls the voltage level in the circuit. The fan motor
high speed circuit is usually a direct power circuit from the fan switch.
Failure Symptoms: Depending on the failure mode, the blower fan may lose one speed
when the resistor fails or it may lose all speeds except high. Excessive heat will cause the
thermal fuse within the resistor to open causing a loss of all lower fan speeds.
Diagnostic Hints: Blockage of the cowl area near the wiper arms with leaves and debris
will cause a loss of air flow around the resistor and lead to a possible failure of the blower
resistor. Also, a blower motor may operate as expected but electrically it may be drawing
too much current. Always check circuit amperage of the blower motor circuit when
replacing a blower motor resistor. Consult a repair resource for proper circuit amperage
The blower motor resistor will typically be in the blower fan case. Because of
the heat created by the resistor, the air movement of the fan is needed to keep the resistor
temperature in control. Excessive heat will damage the blower resistor. Depending on the
vehicle application, the resistor may be accessed from inside the engine compartment in
the passenger rear corner or from inside the vehicle in the area below the glove
compartment storage area.
What It Does:
The blower motor resistor is in the fan motor control circuit to lower the
voltage level available to the fan motor thus controlling fan speed. A typical fan motor
control circuit will have the fan switch applying voltage to the appropriate circuit of the
blower motor resistor; the resistor controls the voltage level in the circuit. The fan motor
high speed circuit is usually a direct power circuit from the fan switch.
Failure Symptoms: Depending on the failure mode, the blower fan may lose one speed
when the resistor fails or it may lose all speeds except high. Excessive heat will cause the
thermal fuse within the resistor to open causing a loss of all lower fan speeds.
Diagnostic Hints: Blockage of the cowl area near the wiper arms with leaves and debris
will cause a loss of air flow around the resistor and lead to a possible failure of the blower
resistor. Also, a blower motor may operate as expected but electrically it may be drawing
too much current. Always check circuit amperage of the blower motor circuit when
replacing a blower motor resistor. Consult a repair resource for proper circuit amperage
=======================================================================
Gebläsemotor Widerstand
Ort:
Der Gebläsemotorwiderstand befindet sich normalerweise im Gebläsegehäuse. Durch
Durch die vom Widerstand erzeugte Wärme wird die Luftbewegung des Lüfters benötigt, um den Widerstand zu halten
Temperatur im Griff. Übermäßige Hitze kann den Gebläsewiderstand beschädigen. Abhängig von
Fahrzeuganwendung kann auf den Widerstand von der Innenseite des Motorraums in zugegriffen werden
die hintere Ecke des Beifahrers oder von innerhalb des Fahrzeugs im Bereich unterhalb des Handschuhs
Fach Stauraum.
Was es macht:
Der Gebläsemotorwiderstand befindet sich im Steuerkreis des Gebläsemotors zum Absenken des
Spannungspegel für den Lüftermotor zur Steuerung der Lüfterdrehzahl. Ein typischer Lüftermotor
Bei einem Steuerkreis legt der Gebläseschalter Spannung an den entsprechenden Stromkreis des
Gebläsemotor Widerstand; Der Widerstand regelt den Spannungspegel im Stromkreis. Der Gebläsemotor
Ein Hochgeschwindigkeitskreis ist normalerweise ein direkter Stromkreis vom Lüfterschalter.
Fehlersymptome: Abhängig vom Fehlermodus kann der Lüfter eine Geschwindigkeit verlieren
Wenn der Widerstand ausfällt oder alle Geschwindigkeiten außer Hoch verlieren kann. Übermäßige Hitze verursacht die
Thermosicherung im Widerstand löst aus, wodurch alle niedrigeren Lüfterdrehzahlen verloren gehen.
Diagnosehinweise: Verstopfung des Motorhaubenbereichs in der Nähe der Wischerarme mit Blättern und Ablagerungen
führt zu einem Luftstromverlust um den Widerstand und zu einem möglichen Ausfall des Gebläses
Widerstand. Ein Gebläsemotor kann auch wie erwartet arbeiten, aber elektrisch kann er ziehen
zu viel Strom. Prüfen Sie immer die Stromstärke des Gebläsemotorkreises, wenn
Ersetzen eines Gebläsemotorwiderstands. Wenden Sie sich an eine Reparaturwerkstatt, um die Stromstärke des Stromkreises zu überprüfen
======================================
Made In Germany USA United States Mexico Japan Nippon Denso Korea Taiwan
| WARRANTY POLICY: |
| We cover return within 30 days from date of purchase. |
| After that buyer responsible to return and pay for replacement shipping cost and to show proof of purchase date. |
| We don't do refund, we exchange. |
| Please contact us to check shipping cost for each item under warranty. |
| The warranty only covers failures due to defects in material and manufacturing and doesn?t cover normal wear and tear or cosmetic damage. |
| Item Should be return with original packaging and in Good Condition by Taking Photo with the date of return |